Fiber Sensors
Looking for an equivalent model for Keyence FU-31, fiber sensor and the dimension is able to match with the Omron counter offer model.
Answer :
You may consider this fiber sensor, E32-D24. The dimension is the same as the Keyence and both the diameter of the sensor is Dia 2.
Looking for an equivalent model for FT-Z30W fiber sensor.
Answer :
You may consider this E32-T15ZR fiber sensor.
Looking for an equivalent E3X-NH11.
Answer :
You may consider E3X-HD11.
Looking for equivalent model for E32-CC200.
Answer :
You may consider E3X-HD11.
Looking for equivalent model for E32-A08H2.
Answer :
You may consider E32-D73-S.
Checking if E3X-HD11 has a robotic cable.
Answer :
Sorry, the cable is not robotic. The bending radius is 12mm.
The internal wiring of E3X-HD11 broke after running at a high frequency. If I change to the connector type using the E3X-CN11, will the problem be solved?
Answer :
Changing of the model will not be able to help if the cause is due to the vibration. As the allowable vibration frequency for both model is the same.
Looking for equivalent array reflective model of a Fiber Sensor with the following requirements: 1. Thickness 5mm or below 2. Sensing range 5mm-100mm 3. Sensing Area: 5mm-10mm (spot type or rectangular type) 4. Application: Machine Outlet Clear Sensor
Answer :
You may consider E32-D36P1 together with an Amplifier depending on your required output.
Looking for equivalent model for E3X-DAB6-S.
Answer :
You may consider E3NX-CA6.
Looking for equivalent model for E3X-DA21-N.
Answer :
You may consider E3NX-FA11AN.
Looking for a equivalent model for Keyence FU-E11.
Answer :
You may consider E32-D36P1.
Shop for Fiber Sensors
