
Photoelectric Sensors
Answer :
This model is only the emitter part. You may select the complete set which is E3JM-10M4-G-N photoelectric sensor
Answer :
You may consider this photoelectric sensor, E3Z-D62: NPN output, 2m pre-wired, 1m sensing distance, and manual tuning. – E3T-ST33 (Light On) or E3T-ST34 (Dark On): PNP output, 2m pre-wired, 2m sensing distance.
Answer :
You may consider this E3FA-TP12 photoelectric sensor.
Answer :
You may consider an E3FA-DN25 photoelectric sensor. For the connector, there are two types XS2F-M12PVC4S2M (Straight) or XS2F-M12PVC4A2M (L-Shaped). Kindly contact us directly at for a quotation.
Answer :
You may consider this photoelectric sensor E3Z-T61. This model has a sensing distance of 15m but kindly take note of the output.
Answer :
The mounting bracket for E3Z-T61 needs to order separately.
Answer :
You may consider E3Z-G81. Please take note that the dimension is different and the sensing distance is 25mm. Kindly contact us directly at for a quotation.
Answer :
You may consider E3JK-TR11 or E3JM-10M4-N.
Answer :
You may consider E3Z-D61 2M. Do take note of the mounting type and direction.
Answer :
You may consider E3Z-D62 2M. Do take note that the sensing distance is 1m, the outlook may be slightly different. Kindly refer to the datasheet here.
Answer :
You may consider E3T-FT11 2M. Do note that the dimensions and ratings are different.
Answer :
You may consider E3JK-TR14.
Answer :
You may consider E3FA-DN11.
Answer :
Sorry, we do not carry such brand. However, you may consider E3Z-D61.
Answer :
You may consider E3Z-R61.
Answer :
You may consider E3FB-DN22.
Answer :
You may consider E3Z-R81.
Answer :
You may consider E3S-DC/E3NX-CA Series.
Answer :
E3R-SR21 sensing distance is 10-200mm while E3T-SR41 sensing distance is 30-200mm.
Answer :
You may consider E3T-SR41. We would recommend to use this with the tapee reflector instead as it has similar specs with E3T-SR21.
Answer :
PZ-G51T and PZ-G51NR are the emitter and the receiver of the Through-Beam Sensor PZ-G51N. You may consider E3Z-T61 2M with the sensing distance of 15m or E3Z-T62 2M with the sensing distance of 30m.
Answer :
You may consider E3NX-CA11 2M.
Answer :
For the Dark-ON or Light-ON operation, it can be changeable depending on the terminal connection.
For Dark-ON, connect the Pink wire to the blue wire and the E3FA-RN22 will be configured as Dark-ON operation mode.
For Light-ON, connect the Pink wire to the brown wire OR open the Pink wire, hence E3FA-RN22 will be configured as Light-On operation mode.
Kindly refer to the datasheet here.
Answer :
You may consider E3Z-T81.
Answer :
You may consider E3FB-RP11 2M + E39-R1S. Kindly note that the housing material is different.
Answer :
You may consider E3Z-G81 with the sensing distance of 25mm, PNP. Kindly take note of the sensing sensing distance.
Answer :
You may consider HN-1805-P1 -> TL-Q5MB1
UN-15R-P -> E3Z-D82. Kindly note that the sensing distance is greater than the one you are using now.
Answer :
You may consider E3Z-B61. Kindly note that this model do not have VDE protection.
Answer :
You may consider E3Z-LS66. Kindly note that this product sensing range is till 200mm only and the degree protection is IP67.
Answer :
You can consider the following:
E3F2-R4B4-P1 –> E3FA-RP21
E4B-LS20E4 –> E4C-DS30 with E4C-UDA11.
Kindly note that this is not a direct 1-1 replacement.
Answer :
You may consider E3FA-DN13 2M. Kindly note that the distance is adjustable by using sensitivity adjuster.