
Timers and Interval Meters
Answer :
You may select the H3CR-A8E timer.
Answer :
You may consider H5CX-L8E-N (100-240VAC) or H5CX-L8ED-N (12 to 24VDC). Please take note that both the model output is contact output (time-limit SPDT + instantaneous SPDT).
Answer :
You may consider this timer, H3CR-A8E.
Answer :
You may consider this timer H3CR-H8L 200-240AC M.
Answer :
You may consider the H3CR-A8 timer. Do check on the operating modes and the panel cutout is 48x48mm.
💡Related Article: 6 Key Features of Omron Timer You Must Know
Answer :
You may consider H3CR-F8 with Flicker Off Start operating mode. The dimension and operation mode are different.
Answer :
You may consider a Power Off-Delay timer, H3CR-H8L, 24AC/DC M with a 5A contact rating of 250VAC.
Answer :
You may consider H3CR-A8 which has similar pin configurations, dimensions, and specifications.
Answer :
You may consider H3DK-S2 with a supply voltage of 24 to 240 VAC/VDC.
Answer :
You may consider H3CR-A8. Please kindly check the suitability before ordering.
Answer :
Sorry, we do not have such a high amp timer switch.
– 0-300 secs
– coil 24VDC
Answer :
You may consider H3Y-2 DC24 5min. Please take note that the model is not fire-retardant and the timing range is different.
Answer :
You may consider H3CR-A8 + P2CF-08.
Answer :
You may consider H3CR-A8E + P2CF-08.
Answer :
You may consider H3CR-A8.
Answer :
You may consider H7ET-NFV1 and H5CX-A-N which uses cumulative mode.
– Operating Voltage of AC/DC24~240V
– Rated frequency of 50/60Hz
– Contact Rating of 250VAC 5A
Answer :
You may consider H3CR-A8 if using mode A and H3CR-A8E if using mode B.
Answer :
You may consider RE17RAMU.
Answer :
You may consider H3CR-A.
Answer :
Yes you can. Please set the operating modes to S.
Answer :
Yes, the item can fulfill you requirements. You will need to set the output time to 1 sec.
Answer :
You may consider H3CR-A8 DC12-24. Kindly note that this counter is with relay output not analog output.
Answer :
You may consider H5CZ-L8 + P2CF-08.
Answer :
You may consider H3CR-A 24-48VAC / 12-48VDC +P2CF-11.
Answer :
You may consider H3CA-8. Kindly note that the contact rating is 3A at 250 VAC.
1) AC200/220/240
2) 10Sec
Answer :
You may consider H3CR-A8.
Answer :
You may consider H3CR-A DC24.
Answer :
You may consider H3Y-4 AC200-230V 60s.
What is the difference between the Timer and the Time Switch?
Answer :
The Timer controls the time from when the power is turned on or the input signal is supplied to when the operation starts. On the other hand, the Time Switch controls the time of day at which the operation starts with the power on.