fbpx

Omron Switch Mode Power Supply S8FS-C

By September 3, 2021All Products, Omron, Products
omron-s8fs
Increased resistance to external disturbances helps achieve stable equipment operation.
Stable quality and reliability.

To Improve Reliability of Equipment, Start with Power Supply Selection

How does a Power Supply contribute to stable equipment operation?

Do your power supplies stop due to unexpected external disturbances?

You can increase your equipment operating rates by selecting Power Supplies that have a high resistance to external disturbances

Designed to Withstand Abnormal Input Voltages Up to 300 VAC*1

In locations where the supply of power is not stable, it is common for abnormal voltages around 300 VAC to be input momentarily. The S8FS withstands this type of momentary abnormal input voltage.

Improved Resistance to Noise of Several Tens of kHz from Inverters

Malfunctions in power supplies can be caused by strong noise of several tens of kHz transmitted from inverters or motors on the same AC line. OMRON measured the noise frequencies and sizes that occurred in actual machines in the past and used them as a standard to improve the noise resistance of the S8FS by harnessing circuit design knowhow to prevent noise from reaching the control section.

Lightening Surge Resistance of 1.5 Times*1 the Standard Value

The catalog value conforms to the value specified in IEC 61000-4-5, but it has been confirmed that the ability has a margin of 1.5 times that value.

Design with details in mind provides stable quality and reliability.

s8fs-power-supply